Plasterer in Hounslow, LDN
Plasterer near me in Hounslow: address and phone for 32 pros
West Plasterer & Decorators
Plastering Team Ltd
GSS PLASTERING LTD
Bens Plastering
Courses in the Home Services field for people in Hounslow
Learn a profession in the Home Services field, with a certificate, and start working in Hounslow.
See courses →Plasterer products in Hounslow
Products in the Home Services field. Everything to work with Plasterer in Hounslow.
See Plasterer products →Home services close to home in Hounslow
Smaller communities like Hounslow are where a dependable local pro really matters. The professionals here tend to know the area well — and if none is listed for Hounslow yet, let us know so we can bring one to you.
In Hounslow, the Plasterer professionals listed here also serve the nearby towns of Twickenham, Sunbury on Thames, Greater London, Sunbury. Contact any of them directly on WhatsApp — no middleman, no commission.
Hounslow has around 66,292 residents — every professional listed serves the city and its surrounding area.
You will find 32 Plasterer professionals in Hounslow here, with direct WhatsApp contact.
The climate in Hounslow averages 11.6°C a year, with January around 5.0°C and July near 18.1°C. The area gets around 789 mm of rain per year. Hounslow sits at about 24 m above sea level.
About Plasterer
Plastering vs Drywall Mudding
Plaster and drywall joint compound are different products. Plaster sets chemically and goes hard in hours, while joint compound dries by losing water. A plasterer can level uneven masonry, cover old brick, and build smooth surfaces in one go. For thin seams between drywall sheets, taping and mudding is usually faster and cheaper than full plaster.
What Happens Around Light Fixtures
Cut-outs for ceiling lights need clean edges and proper sealing around the junction box. A sloppy cut-out causes cracks where the plaster meets the fixture. Ask if the plasterer refills around downlights and whether they wait for the electrician before sealing the ceiling.
How Many Coats Are Usually Needed
A standard 2-coat system covers most fresh plasterboard. A 3-coat system is used on uneven brick or where a glass-like finish is needed. Each coat needs to dry before the next, so a 3-coat job takes longer than a 2-coat job. Ask how many coats are included in the price.
Timing With Other Trades
Plastering should happen after rough plumbing, electrical, and framing are done but before cabinets, trim, or final flooring go in. Skipping this order leads to damaged finishes and rework. Schedule the plasterer for the same week the electrician finishes. Most plasterers need 24 to 48 hours notice and a cleared, dry, heated room on arrival.
Surface Preparation That Matters
Plaster will fail if it goes over dust, grease, or loose paint. The wall has to be scraped, washed, and sometimes primed with a bonding agent. Old wallpaper paste must be fully stripped. On bare concrete or brick, a scratch coat is applied first and allowed to cure. Skipping prep is the most common cause of cracking within the first year.
Aftercare Before Painting or Wallpapering
New plaster needs to dry fully before paint or wallpaper goes on. Latex paint on damp plaster peels within weeks. Most plasterers recommend waiting at least 1 week per coat before priming. Use a mist coat of watered-down emulsion first to seal the surface properly.
How Plasterers Price Small Patch Jobs
Many plasterers set a minimum call-out fee for repairs under 2 m². The minimum covers travel, setup, and cleaning, not just the patch. Bigger patches cost less per square metre because the setup cost is spread wider. Ask about the minimum fee before booking a small repair.
Tools a Plasterer Brings to the Job
A plasterer usually arrives with a hawk, trowel, mixing drill, and plastering rule. Power sanders with dust extraction are common for finishing coats. Smaller tools like a margin trowel and corner trowel shape tight angles. Ask which tools they plan to use, because manual mixing versus a drill changes setup time on site.
Signs of a Bad Plastering Job
Trowel marks, ripples, and visible joints between bays mean poor finishing. Flash setting, where the plaster hardens before it is smoothed, leaves a rough texture. Edges along corners that are not straight usually need sanding or a second pass. Check work with a long torch held flat against the wall before signing off the job.
Types of Plaster Used in Homes
Gypsum plaster is standard for interior walls and ceilings in most modern homes. Lime plaster is softer and lets old walls breathe, which matters in buildings with solid masonry. Cement-based plaster resists moisture and is used in bathrooms, basements, and exterior walls. Each type needs different mixing ratios, drying times, and primers before paint can go on.
Plasterer near you in Hounslow
Looking for Plasterer near me in Hounslow? Every professional listed here works in Hounslow and the surrounding area — the fastest way to find Plasterer near you, with direct WhatsApp contact and no middleman.