Plasterer in Oxford, SE
Plasterer near me in Oxford: address and phone for 10 pros
A.j Hicks plastering
GJOKA Constructions
RJR Plastering & Construction
Oxford Plasterers
Courses in the Home Services field for people in Oxford
Learn a profession in the Home Services field, with a certificate, and start working in Oxford.
See courses →Plasterer products in Oxford
Products in the Home Services field. Everything to work with Plasterer in Oxford.
See Plasterer products →Dependable local pros in Oxford
In a city the size of Oxford, the best professionals often build their reputation on word of mouth. Reach out directly, mention your part of South East England, and you'll usually get a quick, personal reply.
In Oxford, the Plasterer professionals listed here also serve the nearby towns of Oxford Business Park North, South Hinksey, Kennington, Cowley. Contact any of them directly on WhatsApp — no middleman, no commission.
Oxford has around 162,100 residents — every professional listed serves the city and its surrounding area.
You will find 10 Plasterer professionals in Oxford here, with direct WhatsApp contact.
Oxford sits at about 71 m above sea level. People from Oxford are known as “Oxonian”. The climate in Oxford averages 11.0°C a year, with January around 4.7°C and July near 17.3°C.
About Plasterer
Types of Plaster Used in Homes
Gypsum plaster is standard for interior walls and ceilings in most modern homes. Lime plaster is softer and lets old walls breathe, which matters in buildings with solid masonry. Cement-based plaster resists moisture and is used in bathrooms, basements, and exterior walls. Each type needs different mixing ratios, drying times, and primers before paint can go on.
How Many Coats Are Usually Needed
A standard 2-coat system covers most fresh plasterboard. A 3-coat system is used on uneven brick or where a glass-like finish is needed. Each coat needs to dry before the next, so a 3-coat job takes longer than a 2-coat job. Ask how many coats are included in the price.
How to Read a Quote
A proper quote breaks down surface area in square metres, number of coats, and prep work. Ask whether corner beads, mesh tape, and primer are included. Watch for vague lines like labour and materials. Reputable plasterers measure the walls themselves and write the m² on the quote so you can compare offers side by side fairly.
Why Some Walls Need Skim Only
If the existing plaster is sound but rough, a 2 mm to 3 mm skim coat is often enough. Skimming is faster than full re-plastering and produces less waste. However, skimming fails if the old layer is loose. A quick tap test tells the plasterer which route the wall needs.
Surface Preparation That Matters
Plaster will fail if it goes over dust, grease, or loose paint. The wall has to be scraped, washed, and sometimes primed with a bonding agent. Old wallpaper paste must be fully stripped. On bare concrete or brick, a scratch coat is applied first and allowed to cure. Skipping prep is the most common cause of cracking within the first year.
Dust, Mess, and Floor Protection
Plastering creates fine white dust during sanding and wet splashes during application. Ask if the plasterer lays floor sheeting and masks doorways. Furniture should be moved out before work begins. Without protection, dust settles on nearby surfaces for days after the job ends and damages wooden floors.
How Long Plaster Takes to Dry
Finish plaster dries about 1 to 2 mm per day under good airflow and room temperature. A full 10 mm skim coat usually needs 7 to 14 days before painting. Lime plaster can take up to 4 weeks. Forced drying with heaters causes shrinkage cracks. Keep windows open or run a dehumidifier for the first 48 hours after application.
How Plasterers Price Small Patch Jobs
Many plasterers set a minimum call-out fee for repairs under 2 m². The minimum covers travel, setup, and cleaning, not just the patch. Bigger patches cost less per square metre because the setup cost is spread wider. Ask about the minimum fee before booking a small repair.
Cracks, Holes, and Patch Repairs
Hairline cracks under 2 mm wide can be filled with flexible filler and sanded. Wider cracks, blown plaster that sounds hollow when tapped, and water stains usually mean the full coat has to come off. Patch repairs on old plaster rarely match perfectly, so expect to repaint the whole wall rather than spot-painting after a repair.
Soundproofing and Plaster Choices
Standard plaster has little soundproofing value on its own. Adding a dense plaster layer or a multi-layer board system improves acoustic performance. Older walls with lath and lime plaster often block sound better than modern thin skim coats. Discuss acoustic needs before choosing the system.
Plasterer near you in Oxford
Looking for Plasterer near me in Oxford? Every professional listed here works in Oxford and the surrounding area — the fastest way to find Plasterer near you, with direct WhatsApp contact and no middleman.